General Tools
8-in-1 HVAC/R Anemometer with CFM/CMM and Enthalpy
$80.45

N/A

Electrical Testers

Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. The DAF3009 is ideal for measuring all parameters (including airflow volume and enthalpy of evaporation) needed to install, test and fine-tune the performance of an HVAC/R system. It can measure Airflow volume in cubic feet/minute (CFM) or cubic meters/minute (CMM), Air speed (with Min, Max and Avg session values), Enthalpy the heat needed in Btu/lb. to vaporize a liquid, ambient temperature, Dew Point temperature, Wet Bulb temperature, Wind Chill Index (WCI) and Relative humidity (RH).

  • Airflow volume measurement range: 0 to 591,000 CFM
  • 5 available air speed units: ft. /min (fpm), mph, m/sec, km/hour, knots
  • Airflow volume and enthalpy readings available in imperial or metric units
  • Minimum, maximum and average session values for air speed and airflow volume
  • Air speed measurement range/accuracy/resolution: 80 to 5910 fpm/±3% of full-scale value/1 fpm
  • Temperature measurement range/accuracy/resolution: 32° to 122°F/±1.8°F from 68° to 104°F; ±3.6°F elsewhere in range/0.1°
  • RH measurement range/accuracy: 0 to 100%/±3% from 20 to 80%RH; ±5% elsewhere
  • Dew point measurement range: -67° to 122°F
  • Wet bulb measurement range: -31° to 122°F
  • Enthalpy measurement range: -8 to 318 BTU/lb.
  • Large (1.34 x 0.94 in.) backlit dual readout LCD
  • Small and light enough for 1-handed operation
  • Tripod mount
  • Includes vane and sensor cap with wrist strap
  • California residents see Prop 65 WARNINGS
  • WARNING!

    This product can expose you to chemicals including di2-ethylhexylphthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. The DAF3009 is ideal for measuring all parameters (including airflow volume and enthalpy of evaporation) needed to install, test and fine-tune the performance of an HVAC/R system. It can measure Airflow volume in cubic feet/minute (CFM) or cubic meters/minute (CMM), Air speed (with Min, Max and Avg session values), Enthalpy the heat needed in Btu/lb. to vaporize a liquid, ambient temperature, Dew Point temperature, Wet Bulb temperature, Wind Chill Index (WCI) and Relative humidity (RH).

  • Airflow volume measurement range: 0 to 591,000 CFM
  • 5 available air speed units: ft. /min (fpm), mph, m/sec, km/hour, knots
  • Airflow volume and enthalpy readings available in imperial or metric units
  • Minimum, maximum and average session values for air speed and airflow volume
  • Air speed measurement range/accuracy/resolution: 80 to 5910 fpm/±3% of full-scale value/1 fpm
  • Temperature measurement range/accuracy/resolution: 32° to 122°F/±1.8°F from 68° to 104°F; ±3.6°F elsewhere in range/0.1°
  • RH measurement range/accuracy: 0 to 100%/±3% from 20 to 80%RH; ±5% elsewhere
  • Dew point measurement range: -67° to 122°F
  • Wet bulb measurement range: -31° to 122°F
  • Enthalpy measurement range: -8 to 318 BTU/lb.
  • Large (1.34 x 0.94 in.) backlit dual readout LCD
  • Small and light enough for 1-handed operation
  • Tripod mount
  • Includes vane and sensor cap with wrist strap
  • California residents see Prop 65 WARNINGS
  • WARNING!

    This product can expose you to chemicals including di2-ethylhexylphthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. The DAF3009 is ideal for measuring all parameters (including airflow volume and enthalpy of evaporation) needed to install, test and fine-tune the performance of an HVAC/R system. It can measure Airflow volume in cubic feet/minute (CFM) or cubic meters/minute (CMM), Air speed (with Min, Max and Avg session values), Enthalpy the heat needed in Btu/lb. to vaporize a liquid, ambient temperature, Dew Point temperature, Wet Bulb temperature, Wind Chill Index (WCI) and Relative humidity (RH).

  • Airflow volume measurement range: 0 to 591,000 CFM
  • 5 available air speed units: ft. /min (fpm), mph, m/sec, km/hour, knots
  • Airflow volume and enthalpy readings available in imperial or metric units
  • Minimum, maximum and average session values for air speed and airflow volume
  • Air speed measurement range/accuracy/resolution: 80 to 5910 fpm/±3% of full-scale value/1 fpm
  • Temperature measurement range/accuracy/resolution: 32° to 122°F/±1.8°F from 68° to 104°F; ±3.6°F elsewhere in range/0.1°
  • RH measurement range/accuracy: 0 to 100%/±3% from 20 to 80%RH; ±5% elsewhere
  • Dew point measurement range: -67° to 122°F
  • Wet bulb measurement range: -31° to 122°F
  • Enthalpy measurement range: -8 to 318 BTU/lb.
  • Large (1.34 x 0.94 in.) backlit dual readout LCD
  • Small and light enough for 1-handed operation
  • Tripod mount
  • Includes vane and sensor cap with wrist strap
  • California residents see Prop 65 WARNINGS
  • WARNING!

    This product can expose you to chemicals including di2-ethylhexylphthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Download Our Manuals

Currently no manuals available for this product. Please check product description or call our sales support team if you have any further queries.

Specifications

Dimensions

Product Depth (in.)
0.87
Product Height (in.)
5.8
Product Width (in.)
2.1

Details

Batteries Included
Yes
Battery Power Type
Lithium Coin
Battery Size
CR2032
Battery Type Required
CR2032
Control Type
Manual/Analog
Display Type
LCD
Electrical Tools Features
Backlit,Data Hold
Measures/Detects
Humidity,Wind Speed
Number of Batteries Required
1
Product Weight (lb.)
0.2lb
Returnable
90-Day
Test Meter Type
Specialty Meter/Tester
Tools Product Type
Test Meter

Warranty / Certifications

Manufacturer Warranty
1 Year

requestaquote Get Free Quotes callnow 888-506-9527